Author Archives: dieselminded

Upgrading to 16cm Exhaust Housing

With this guide we have a donor charger so Removal of the charger is not included Refer to the Charger Swap Guide for further information Completion time: Less than 2 Hours Here’s a 16cm Holset Exhaust Housing Here’s the Exhaust Gasket Here’s the Oil Return Line Gasket Here’s the donor charger This set up is […]

Posted in Exhaust, Performance | Tagged , | Comments closed

Dodge Cummins Under Hood Mods

Click picture for a full size view. Click on the product titles below for a link to a dealer OuterWears FAQs (Questions About Prefilters) Why do I need a Pre-Filter? How does a Pre-Filter work? Will adding a Pre-filter reduce my airflow or horsepower? Will the Pre-Filters work on paper filters? How much dirt will […]

Posted in Electrical, Engine, Exhaust, Fuel Systems, General, Performance | Tagged , , , | Comments closed

Turbo Comparison Photos

Here are some comparison photos of After Market Turbos compared to Stock Equipment Click on images for a larger view. Thanks To : Henry H Wyatt II From left to right 02′ Stock, HX 40, HT3B (from piers street twin setup) HY35 vs B 1-2 Thanks To : Bill Soule

Posted in Exhaust, Performance | Tagged , , , | Comments closed

Turbo Comparisons

When in the process of bombing a CTD you will have to increase your fuel. With the increase of fuel comes an increase in heat. You can safely run 1200° once in a while but major failure can occur if your running at high heat conditions for a period of time. To keep things cooled […]

Posted in Exhaust, Performance | Tagged , , | Comments closed

24V Transmission Pan Comparisons

By adding an increased capacity transmission pan you decrease your fluid temperature and prolong the life of your transmission. Here are some options: Hughes (www.hughesperformance.com) Bolt on deep transmission pans are made from cast aluminum and designed with cooling fins to dissipate heat quicker. Cast aluminum pans hold approximately 2 to 4 extra quarts of […]

Posted in Transmission | Tagged | Comments closed

Serpentine Belt Replacement

Work performed on a 2002 Time Of Completion : 30 Mins Here’s my belt @ 48,000 miles may want to check yours out Tools Required : 1/2 Inch Drive Ratchet & an 1/2 to 3/8 reducer Parts Required : Here’s the Gatorback belt $33.50 at AutoZone; this part Number is for Models with A/C This […]

Posted in Cooling, Engine | Tagged | Comments closed

Pyro Tap Help

Install Help. Note: Tap Size May Vary [thanks to DIS dieselpage.com used with permission]

Posted in Engine, General | Tagged | Comments closed

Propane Kit Comparison

When Propane is added to the air intake usually the horn it ensures that all the Diesel is turned into Power. When propane is used properly, it will keep your engine cleaner with less carbon buildup and cleaner oil. Propane is a high-octane fuel and burns slower and longer therefore, propane will help diesel burn […]

Posted in Fuel Systems, Performance | Tagged , , | Comments closed

P Pump Cutaway

I snapped these Photos at SDX Aneroid Fuel Plate Governor Arm Governor Spring Cover and Throttle Cable Connection Point Governor Springs Pump Cam Delivery Valves Together

Posted in Fuel Systems | Tagged , | Comments closed

Detailed Dodge Diesel Oil Change

Supplies: 3 Gallons Oil; Mobil Delvac Super 1300 is what I use, I should probably be using the Synthetic stuff. But I don’t. Oil Filter; My Fleet Guard Filter supply was tapped out so I had to run to advanced auto and get a Purolator… $15 !! The Fleet Guard Filters can be had for […]

Posted in Engine, Maintenance | Tagged , , , | Comments closed