Spec Intake Exhaust Minimum 0.152 mm (0.006 inch) 0.381 mm (0.015 inch) Standard 0.254 mm (0.010 inch) 0.508 mm (0.020 inch) Maximum 0.381 mm (0.015 inch) 0.762 mm (0.030 inch) Adjustments should only be performed when the engine coolant temperature is less than 60°C (140°F).
5.9 L CTD 22.7 L or 24 Quarts Includes 1 quart for reservoir
The Vehicle Identification Number (VIN) plate is located on the dash by the windshield near the left A-pillar. Position Interpretation Code Description 1 Country Of Orgin 3 Mexico 2 Make 8 Dodge 3 Vehicle type 6 Incomplete 7 Truck 4 Gross Vehicle Weight Rating K 8,001 – 9,000 M 10,001 – 14,000 5 Vehicle line […]
Click the link below for the pdf version of Cummins Motor Parts and Prices Cummins Motor Parts and Prices
Work Performed On: 2002 CTD Estimated time of Completion: 2 Hrs Parts Required: Brake Shoes, Brake Cleaner, Brake Fluid, Little Helper Tools Required: 1/2 Inch Drive Ratchet, Cheater Pipe, 2 Extensions, 15/16 6 pt Socket, 7/32 Allen Wrench, 16 MM 12 pt Socket, Big Strait Screw Driver, Floor Jack, Penetrating Oil, 3/8 inch wrench Product […]
Water Injection : Injecting water into the intake , Decreases the volume of each cylinder Sends the Pistons into Over Drive , add some alcohol to up the flash point of diesel and to be sure it all burns up and burns up fast and you have the complete package. Cooling Mist (www.coolingmist.com) Our Diesel […]
The simple explanation: a waste gate limits the maximum boost generated by the turbocharger. How it works and what it does: The waste gate uses a pressure activated diaphragm and rod to operate an exhaust bypass around the turbocharger and thus limit the maximum boost that the turbocharger can produce. This permits an engine manufacturer […]
This is a comparison between a Vulcan fitting and your stock banjo set up. The Vulcan Fittings are CNC Stainless Steal and are avalible with a tap in them for running a Fuel Pressure gauge. Vulcans Fitting replace The Stock Banjo’s at the following locations : VP44 inlet Fuel Filter Housing Inlet Fuel Filter Housing […]
Work Performed on 2002 CTD My truck has an existing Carter Pusher Pump. I’m using the Vulcan Kit to Replace all the restrictive banjo Fittings and fuel lines. Estimated Time of completion : 3 Hrs Kit includes: Stainless Steel Vulcan Full Flow Fittings, Vulcan integrated fuel pressure adaptor (00-02 only), 30R7 fuel line, extended pump […]
Here’s the Stocker And here’s the Bombed Valve cover Available Here at the Database: check the marketplace :: Bob Wagner The only tools you’ll need is a 1/4 inch drive ratchet and a 10 MM socket Really clean up the stock valve cover you do not want anything to fall down in to the valves […]
