Work Performed On: 2002 CTD Estimated time of Completion: 2 Hrs Parts Required: Brake Shoes, Brake Cleaner, Brake Fluid, Little Helper Tools Required: 1/2 Inch Drive Ratchet, Cheater Pipe, 2 Extensions, 15/16 6 pt Socket, 7/32 Allen Wrench, 16 MM 12 pt Socket, Big Strait Screw Driver, Floor Jack, Penetrating Oil, 3/8 inch wrench Product […]
[A] Gently pry up on the little tap this will release a small piece of metal that just slides under the gear. After clip is released you will have to pry the WSW bottom off the gear this is the bad part — took longer to get the WSW off the gear then it did […]
With this guide we have a donor charger so Removal of the charger is not included Refer to the Charger Swap Guide for further information Completion time: Less than 2 Hours Here’s a 16cm Holset Exhaust Housing Here’s the Exhaust Gasket Here’s the Oil Return Line Gasket Here’s the donor charger This set up is […]
Here’s the dust cover that needs to be removed to access the governor springs Once the dust cover is removed you’ll need to turn the motor over till a set of springs is lined up perfectly in the opening … there are 2 sets of springs they are mounted opposite of each other Here’s how […]
Here is a sheet for replacing the injectors on a Dodge 24v Cummins [thanks to Diesel Dynamics] DD-Injector-Install-Instructions
