[A] Gently pry up on the little tap this will release a small piece of metal that just slides under the gear. After clip is released you will have to pry the WSW bottom off the gear this is the bad part — took longer to get the WSW off the gear then it did […]
Tired of always finding the weather strip laying on top of the turbocharger in the engine compartment? A bead of silicone rubber RTV in the weatherstrip groove will keep the strip attached and eliminate the fire danger. Red RTV or high strength gray RTV is my favorite for this type of work. Black RTV would […]
Here’s a convenient and easy method of applying rust preventing solutions to inner panels and seams to control or avoid rust to various body seams. The nicest feature, is that you don’t have to remove interior panels to apply, just insert the feed hose into where you want to apply your rustproofing. The specific solutions […]
Just after the winter began winding down and the weather was beginning to warm up, I removed a large 30″ x 18″ vinyl sticker from the tailgate of my truck. No matter how much heat was applied, the back of the sticker refused to come loose. I tried everything, Goof-Off®, fingernail polish remover, paint thinner, […]
This is a followup article to Cleaning Stickum Left From Vinyl After the last article regarding removing the stickum leftover from vinyl lettering and signs, several people got hold of me to let me know of their remedies. DM left a comment on the article site about peanut butter removing residue left behind by decals. […]
