Click picture for a full size view. Click on the product titles below for a link to a dealer OuterWears FAQs (Questions About Prefilters) Why do I need a Pre-Filter? How does a Pre-Filter work? Will adding a Pre-filter reduce my airflow or horsepower? Will the Pre-Filters work on paper filters? How much dirt will […]
The important thing is the 2 port vacuum switch…you need to get one that is ‘open’ when it’s in the off position so vacuum can flow through normally. I used a Nippondenso EGR vacuum switch for a Honda Civic. They never break! The rest of the parts list is simple and small: Rocker switch (I […]
A big thanks goes to John Anderson for being the Pioneer on this type of project and sharing his project with all of us. In that same spirit, I threw some pics into a collage to be able to share what I can now, until I can do a formal write up for this site. […]
It’s been said that the factory fan consumes horsepower, and I’ve heard conflicting results as to what the power increase would be if you were to eliminate the fan and go electric. Me, I just don’t like the idea of that big thing swinging around on the end of the water pump, putting all that […]
This article will hopefully give you some insight on how to adjust your fuel injection pump on 88-93 7.3L Non-Powerstroke, IDI. This will probably work the same way on a 6.9L Navistar(Ford) engine as well. To start off, I would recommend putting in a pyrometer gauge before doing any kind of performance upgrades. I would […]
The steps for turning up a P7100 pump are: 1) Remove your AFC Housing 2) Mod Your Fuel Plate either slide it forward or purchase a cut one 3) Adjust the governor lever to contact the fuel plate 4) Crank the star Wheel Towards the motor 5) Slide The AFC housing all the way forward […]
Here are some comparison photos of After Market Turbos compared to Stock Equipment Click on images for a larger view. Thanks To : Henry H Wyatt II From left to right 02′ Stock, HX 40, HT3B (from piers street twin setup) HY35 vs B 1-2 Thanks To : Bill Soule
Click on Image for a Larger View [thanks to Garrett used with permission]
When in the process of bombing a CTD you will have to increase your fuel. With the increase of fuel comes an increase in heat. You can safely run 1200° once in a while but major failure can occur if your running at high heat conditions for a period of time. To keep things cooled […]
Complaint ————-> Probable Cause WillNotStart HardToStart StartsAndStalls DiesOnDeceleration RunsRough LackOfPower BlackSmoke WhiteSmoke Low Cranking Speed X X Incorrect StartingProcedure X X Some or All Glow Plugs Bad X X X X No Fuel to Cylinders X […]
