This mod article will walk you through the steps of installing a Fast Idle Switch. Application: ’05 6.0 PSD with Torque Shift Transmission. Tools Required: 10mm socket with extension and ratchet Wire striper, cutter, crimp tool At least 5 feet of wire (12-14 gauge, color is user defined) 2 sets of butt or spade […]
The important thing is the 2 port vacuum switch…you need to get one that is ‘open’ when it’s in the off position so vacuum can flow through normally. I used a Nippondenso EGR vacuum switch for a Honda Civic. They never break! The rest of the parts list is simple and small: Rocker switch (I […]
This article will hopefully give you some insight on how to adjust your fuel injection pump on 88-93 7.3L Non-Powerstroke, IDI. This will probably work the same way on a 6.9L Navistar(Ford) engine as well. To start off, I would recommend putting in a pyrometer gauge before doing any kind of performance upgrades. I would […]
1. Air up your tires.Keeping your tires aired up to manufacturers specs can help your fuel economy up. 2. Leave your tailgate up!The tailgate up creates a vortex behind the cab which pushes air up over the tailgate. The tailgate down allows the air to push down on the bed creating drag. 3. Be easy […]
A silencer ring is a metal baffle placed into the turbocharger inlet to reduce whistle from the turbocharger. It is installed in Ram truck engines at the request of Chrysler. The silencer ring has no effect on engine output, EGT, or boost levels. Removal: Remove the flex hose from the front of the turbo that […]
[Copyright Diesel Injection Service used with permission]
This is how I replaced the lift pump on my ’99 QC, 4×4. Not sure what variations may or may not accure on other models. Parts list…………..New lift pump, lift pump wire pig tail, banjo bolts washers (8), dielectric grease and approx 1/2 gallon of clean diesel. Tools ………. 3/8″ drive ratchet, 3 or 4 […]
Procedures for a 1999 Ram NOTE: You may be able to improve this but this is exactly what we did and changed two pumps in less that two hours) TOOLS: 17 mm wrench & socket, 10 mm wrench & socket, 7/16 socket, 1/2 inch socket. Lay a non-conducting material over the battery posts (fender cover, […]
Work Performed On: 2002 CTD Estimated time of Completion: 2 Hrs Parts Required: Brake Shoes, Brake Cleaner, Brake Fluid, Little Helper Tools Required: 1/2 Inch Drive Ratchet, Cheater Pipe, 2 Extensions, 15/16 6 pt Socket, 7/32 Allen Wrench, 16 MM 12 pt Socket, Big Strait Screw Driver, Floor Jack, Penetrating Oil, 3/8 inch wrench Product […]
Bigger injectors require more fuel. Lots more fuel than what the oem system can put out. And the oem stuff has many faults, which just makes it that much more appealing to replace the whole darn system! I was planning on doing some work to the truck and I knew it would be laid up […]
