This documentation is intended to be used as a visual overview only and is not meant to be used as a replacement for a service manual. Please consult your Dodge service manual for complete instructions on the removal and re-installation of an injection pump The truck in this project is a 2000 Dodge Ram 3500 […]
Tools needed: 14mm wrench 15mm wrench 19mm wrench Large Flat blade screwdriver soft mallet or wood block Engine Barring Tool Long 1/2″ drive wrench Torque Wrench feeler gauge NOTE: The Cummins Midrange Performance Tool Kit (P/N 3399869) contains all of the tools required for an oil and oil filter change, a fuel filter change, and […]
Here is a sheet for replacing the injectors on a Dodge 24v Cummins [thanks to Diesel Dynamics] DD-Injector-Install-Instructions
1998 CTD No Description 1 Fuel Transfer (Lift) Pump 2 Fuel Return Line (to Fuel Tank) 3 Fuel Supply Line (Low Pressure, to Engine) 4 Fuel Heater 5 Water-in-Fuel (WIF) Sensor 6 Fuel Filter / Water Separator 7 IAT Sensor 8 Map (Boost) Sensor 9 Fuel Drain Manifold 10 CKP Sensor 11 CMP Sensor 12 […]
Adjusting the idle speed on the diesel engine is not difficult. The adjustment is located on the driver side of the injector pump near the rear of the pump. You will need a 10 mm wrench. Correct speed is: 1994-1998 with AT – in drive with AC on 750 -800 RPM 1994-1998 with manual in […]
Here is a diagram for the 12V Dodge Cummins Fuel System. [Click on image for larger version]
The maintenance schedule in the owners manual indicates the “strainer” should be cleaned at 12000 mile intervals at the same time the fuel filter is replaced. This is for both the “A” and “B” maintenance schedules. In the instructions in the service manual for replacing the fuel filter it states “Whenever the fuel filter is […]
