2WD – Only one pair of wheels are driven by engine power 4WD – One or both pairs of wheels are driven by engine power. 454 CUBIC INCH – Large gasoline engine option available in full size Chevy/GMC Trucks and Motorhomes. 460 CUBIC INCH – Large gasoline engine option available in full size Ford Trucks […]
Work Performed On: 2002 CTD Estimated time of Completion: 2 Hrs Parts Required: Brake Shoes, Brake Cleaner, Brake Fluid, Little Helper Tools Required: 1/2 Inch Drive Ratchet, Cheater Pipe, 2 Extensions, 15/16 6 pt Socket, 7/32 Allen Wrench, 16 MM 12 pt Socket, Big Strait Screw Driver, Floor Jack, Penetrating Oil, 3/8 inch wrench Product […]
[A] Gently pry up on the little tap this will release a small piece of metal that just slides under the gear. After clip is released you will have to pry the WSW bottom off the gear this is the bad part — took longer to get the WSW off the gear then it did […]
PYRO: Temperatures will vary whenever the throttle is moved or the terrain changes. The peak number is the most important while towing, the ISB can be safely run up to 1450 for short bursts and 1350 all day long. This number is strongly affected by modifications weather it be Air flow or Fuel delivery. If […]
Water Injection : Injecting water into the intake , Decreases the volume of each cylinder Sends the Pistons into Over Drive , add some alcohol to up the flash point of diesel and to be sure it all burns up and burns up fast and you have the complete package. Cooling Mist (www.coolingmist.com) Our Diesel […]
The simple explanation: a waste gate limits the maximum boost generated by the turbocharger. How it works and what it does: The waste gate uses a pressure activated diaphragm and rod to operate an exhaust bypass around the turbocharger and thus limit the maximum boost that the turbocharger can produce. This permits an engine manufacturer […]
This is a comparison between a Vulcan fitting and your stock banjo set up. The Vulcan Fittings are CNC Stainless Steal and are avalible with a tap in them for running a Fuel Pressure gauge. Vulcans Fitting replace The Stock Banjo’s at the following locations : VP44 inlet Fuel Filter Housing Inlet Fuel Filter Housing […]
Work Performed on 2002 CTD My truck has an existing Carter Pusher Pump. I’m using the Vulcan Kit to Replace all the restrictive banjo Fittings and fuel lines. Estimated Time of completion : 3 Hrs Kit includes: Stainless Steel Vulcan Full Flow Fittings, Vulcan integrated fuel pressure adaptor (00-02 only), 30R7 fuel line, extended pump […]
Here’s the Stocker And here’s the Bombed Valve cover Available Here at the Database: check the marketplace :: Bob Wagner The only tools you’ll need is a 1/4 inch drive ratchet and a 10 MM socket Really clean up the stock valve cover you do not want anything to fall down in to the valves […]
A silencer ring is a metal baffle placed into the turbocharger inlet to reduce whistle from the turbocharger. It is installed in Ram truck engines at the request of Chrysler. The silencer ring has no effect on engine output, EGT, or boost levels. Removal: Remove the flex hose from the front of the turbo that […]
