It was a busy Saturday. Trucks were lined up in the vacant lots behind Alligator Performance waiting to get dyno’d. This was Alligator Performance’s first event – and for a small, relatively new company, this was a big event. Alligator Diesel Performance opened their doors in Las Vegas in 2005. In 2009, they moved to […]
Before we talk about what EatsRice.com has to offer your diesel rig and what the benefits of the EatsRice mod is, we need to explain what a ricer is, for those who may not have heard about them. A “ricer”, or “rice,” are sometimes known as “rice burners.” They are gutless foreign or domestic cars […]
Click the link below for the excel version of Gear Ratio Spreadsheet Gear Ratio Spreadsheet
Water Injection : Injecting water into the intake , Decreases the volume of each cylinder Sends the Pistons into Over Drive , add some alcohol to up the flash point of diesel and to be sure it all burns up and burns up fast and you have the complete package. Cooling Mist (www.coolingmist.com) Our Diesel […]
The simple explanation: a waste gate limits the maximum boost generated by the turbocharger. How it works and what it does: The waste gate uses a pressure activated diaphragm and rod to operate an exhaust bypass around the turbocharger and thus limit the maximum boost that the turbocharger can produce. This permits an engine manufacturer […]
This is a comparison between a Vulcan fitting and your stock banjo set up. The Vulcan Fittings are CNC Stainless Steal and are avalible with a tap in them for running a Fuel Pressure gauge. Vulcans Fitting replace The Stock Banjo’s at the following locations : VP44 inlet Fuel Filter Housing Inlet Fuel Filter Housing […]
Work Performed on 2002 CTD My truck has an existing Carter Pusher Pump. I’m using the Vulcan Kit to Replace all the restrictive banjo Fittings and fuel lines. Estimated Time of completion : 3 Hrs Kit includes: Stainless Steel Vulcan Full Flow Fittings, Vulcan integrated fuel pressure adaptor (00-02 only), 30R7 fuel line, extended pump […]
Here’s the Stocker And here’s the Bombed Valve cover Available Here at the Database: check the marketplace :: Bob Wagner The only tools you’ll need is a 1/4 inch drive ratchet and a 10 MM socket Really clean up the stock valve cover you do not want anything to fall down in to the valves […]
Click the link below for the pdf version of the Superchips Installation Guide for the 3705 Superchips Installation Guide for the 3705
[thanks to K-O Engineering] Click the link for the pdf version of the RASP installation manual for the 24V CTD motor. RASP installation manual
