This is a followup article to Cleaning Stickum Left From Vinyl After the last article regarding removing the stickum leftover from vinyl lettering and signs, several people got hold of me to let me know of their remedies. DM left a comment on the article site about peanut butter removing residue left behind by decals. […]
(1) you need to disconnect both negative battery cables at both batteries. I used a 1/2 inch deep socket to remove the cables from the battery terminals. (2) Remove starter motor to get to CKP. The sensor is located on the driver’s side of the engine with the starter motor placed in front of it. […]
This documentation is intended to be used as a visual overview only and is not meant to be used as a replacement for a service manual. Please consult your Dodge service manual for complete instructions on the removal and re-installation of an injection pump The truck in this project is a 2000 Dodge Ram 3500 […]
In the shop, ready to get started. The original tailpipe. This picture clearly shows the difference in size between the old exhaust, and the new! The setup for the new exhaust, showing the front aftermarket 14 inch long anti-drone muffler, and the standard muffler further down – both are straight-thru design mufflers. A view from […]
Post Your Successful Diesel Mods At Dieseldatabase
Have you completed a successful mod on your diesel truck? and did you take pictures and discovered tips that might help others? Your post is welcome here. All you have to do is register on this site. Then contact us via the the contact form on the ABOUT page (see menu), letting us know you […]