It was a busy Saturday. Trucks were lined up in the vacant lots behind Alligator Performance waiting to get dyno’d. This was Alligator Performance’s first event – and for a small, relatively new company, this was a big event. Alligator Diesel Performance opened their doors in Las Vegas in 2005. In 2009, they moved to […]
Subject: [RTML] Cummins idle speed How do I adjust the idle speed on my Ram diesel? The idle speed seems too high. First, trace the accelerator linkage to the connection on the fuel pump. With the ENGINE OFF have someone floor the accelerator and watch the fuel arm move. The best position I can describe […]
When Propane is added to the air intake usually the horn it ensures that all the Diesel is turned into Power. When propane is used properly, it will keep your engine cleaner with less carbon buildup and cleaner oil. Propane is a high-octane fuel and burns slower and longer therefore, propane will help diesel burn […]
With this guide we have a donor charger so Removal of the charger is not included Refer to the Charger Swap Guide for further information Completion time: Less than 2 Hours Here’s a 16cm Holset Exhaust Housing Here’s the Exhaust Gasket Here’s the Oil Return Line Gasket Here’s the donor charger This set up is […]
The maintenance schedule in the owners manual indicates the “strainer” should be cleaned at 12000 mile intervals at the same time the fuel filter is replaced. This is for both the “A” and “B” maintenance schedules. In the instructions in the service manual for replacing the fuel filter it states “Whenever the fuel filter is […]
Just after the winter began winding down and the weather was beginning to warm up, I removed a large 30″ x 18″ vinyl sticker from the tailgate of my truck. No matter how much heat was applied, the back of the sticker refused to come loose. I tried everything, Goof-Off®, fingernail polish remover, paint thinner, […]
This is a comparison between a Vulcan fitting and your stock banjo set up. The Vulcan Fittings are CNC Stainless Steal and are avalible with a tap in them for running a Fuel Pressure gauge. Vulcans Fitting replace The Stock Banjo’s at the following locations : VP44 inlet Fuel Filter Housing Inlet Fuel Filter Housing […]
Post Your Successful Diesel Mods At Dieseldatabase
Have you completed a successful mod on your diesel truck? and did you take pictures and discovered tips that might help others? Your post is welcome here. All you have to do is register on this site. Then contact us via the the contact form on the ABOUT page (see menu), letting us know you […]