A. THERMOCOUPLE INSTALLATION – The R650 Thermocouple mounts into a 1/4″ pipe thread. If the exhaust manifold is already drilled and tapped, install the thermocouple at that location. If none is provided, make a 3/4″ hole in the exhaust pipe, not more than 6″ below the exhaust-manifold-to-exhaust-pipe connection and weld the R680 bushing into the […]
This mod article will walk you through the steps of installing a Fast Idle Switch. Application: ’05 6.0 PSD with Torque Shift Transmission. Tools Required: 10mm socket with extension and ratchet Wire striper, cutter, crimp tool At least 5 feet of wire (12-14 gauge, color is user defined) 2 sets of butt or spade […]
For TPS adjustment, Joe G. suggested using a potentiometer in the ground circuit. I decided to try it and It really gives a much better range of adjustment than elongating holes in the TPS body. Here is a schematic drawing showing how to wire it. Using the above circuit, adjusting the potentiometer adds resistance to […]
Post Your Successful Diesel Mods At Dieseldatabase
Have you completed a successful mod on your diesel truck? and did you take pictures and discovered tips that might help others? Your post is welcome here. All you have to do is register on this site. Then contact us via the the contact form on the ABOUT page (see menu), letting us know you […]